apc ftp login failed

Everyone values online security, but every day a large number of accounts are stolen and traded on the black market. Try not to log in to your account on a public computer, especially money-related accounts. Install mainstream browsers, and they will warn you of the risks. In addition, if you receive an email from the bank, do not click directly, but call the bank.

Cannot connect to a unit using HTTP, FTP, SNMP, Telnet …

https://www.apc.com/us/en/faqs/FA384675

Sep 28, 2021 · In firmware v6.8.0 and later, HTTP, FTP, SNMP, Telnet, and all default accounts except for the Super User are disabled by default to increase security. These settings are not applied during a firmware update, but they are enforced when you perform a Reset to Defaults (using the Web UI or CLI) or use the format command in the CLI.

###

Video: How do I upgrade the firmware on an APC Network …

https://www.apc.com/us/en/faqs/FA156047

Sep 29, 2021 · C:\> cd apc C:\apc> 3. Open an FTP client session. C:\apc> ftp 192.168.1.100 (192.168.1.100 being the IP address of the web card) 4. Log in as Administrator (apc is the default user name and password). 5. Upgrade the firmware: ftp> bin (specifies binary transfer mode which is …

###

Having issues upgrading APC firmware? – Vivi The Mage

vivithemage.com/2016/03/16/having-issues-upgrading-apc-firmware

Mar 16, 2016 · C:\>cd\apc C:\apc> 3. Open an FTP client session. C:\apc> ftp 192.168.1.100 (192.168.1.100 being the IP address of the web card) 4. Log in using the Administrator User Name and Password. Your passwords may be different than the defaults, “apc” and “apc”. Typically, the password will appear on the screen as ***. Connected to 192.168.1.100

###

Data Center Expert – APC by Schneider Electric

https://www.apc.com/us/en/faqs/FA177004

FTP NMC firmware version 6.X 1) Log into the web interface of the APC NMC using administrator credentials. 2) Configuration Menu > Network > FTP Server. 3) Ensure that the Enable checkbox is checked. Also take note of the port number, by default it is 21. SCP NMC firmware version 6.X 1) Log into the web interface of the APC NMC using administrator credentials. 2) Configuration Menu > …

###

File transfers may be unsuccessful using SCP on devices …

https://www.apc.com/us/en/faqs/FA274541

Sep 29, 2021 · Note: Both SCP and FTP file transfer fails on all v6.X.X devices with touch screens (apc_hw06_aos_xxx). Resolution It is recommended to upgrade your NMC2 devices to use AOS v6.3.3 or higher which is readily available for most NMC2 enabled devices and applications.

###

MPECS Inc. Blog: APC AP9630 Management Card: Error: The …

blog.mpecsinc.ca/2012/06/apc-ap9630-management-card-error.html

Jun 13, 2012 · If you password is too long the upgrade will fail when trying to log in after the first part of the upgrade. login via Telnet and shorten your password, and re …

###

[SOLVED] ftp login failure – LinuxQuestions.org

https://www.linuxquestions.org/questions/linux…

Apr 29, 2014 · Our client uses ftp to access the RedHat box. All gets login failure. Reason to user ftp? Client’s application requests it. $ ftp urh04 Connected to urh04. 220 (vsFTPd 2.0.5) Name (urh04:mytest): 331 Please specify the password. Password: 530 Login incorrect. Login failed. ftp> quit 221 Goodbye. Here is /etc/vsftpd/vsftpd.conf : anon_world_readable_only=NO

###

https://iportal2.schneider-electric.com/Contents/…

File Transfer Protocol (FTP) Secure Copy (SCP) Telnet Syslog RADIUS. UPS Network Management Card 2 User’s Guide 2 … The default user name is device, and the default password is apc. • A Read-Only User has the following restricted access: – Access through the UI only.

###

php – Why is ftp_login() authentication failing? – Stack …

https://stackoverflow.com/questions/30751789

Jun 10, 2015 · Try dropping @host.com from your $ftp_user_name string. Use this to see if your credentials are correct: if (ftp_login ($connect, $ftp_user_name, $ftp_user_pass)) { echo "Connected as $ftp_user_name@$ftp_host\n"; } else { echo "Couldn’t connect as $ftp_user_name\n"; } Note, this code will show errors. Share. Improve this answer.

###

Such geek. Wow. – Firmware update on an APC AP9630 NMC2

https://www.ericlight.com/firmware-update-on-an-apc-ap9630-nmc2.html

Sep 02, 2017 · Make sure you know the username and password (default credentials are apc/apc), and that the FTP server is enabled. Then, go ahead and ftp to the NMC on it’s IP address. $ ftp ftp> open x.x.x.x Connected to x.x.x.x. Name ( eric ) : apc Password: apc 230 Login successful.

Leave a Reply

Your email address will not be published. Required fields are marked *